(Genuine) Original MB Star C6 Xentry diagnosis VCI DOIP C6 Diagnostic tool PLUS For Mercedes BENZ Cars and Trucks

Original Mb star C6 original Multiplexer with DoIP

The XENTRY Diagnosis VCI made by BOSCH is the latest interface for Mercedes and SMART vehicles. Pass-through interface provides complete communication between a vehicle and the XENTRY software. Support new Mercedes-Benz Diagnosis, SCN Coding, and Programming. Fully compatible with the DoIP protocol and Wi-Fi.

The Original Mercedes-Benz C6 XENTRY Diagnosis VCI DOIP Pass-through Interface is the authentic interface designed specifically for Mercedes and SMART vehicles. It serves as a superior alternative to the SD C4 and C5 interfaces.

The XENTRY Diagnosis VCI, also known as the MB Star C6, acts as a Pass-through Interface. Its primary function is to facilitate seamless communication between a vehicle and the XENTRY software installed on a PC. In essence, it serves as the essential link that enables comprehensive diagnostics and programming for Mercedes-Benz vehicles.

Mb star c6 original Multiplexer with DoIP Condition:

1. Genuine Xentry Diagnostic VCI
2. There Are Second-Hands(98% New) and Brand New For Choose .

• Comes with OBD2 cable, USB cable
• Software is not included
• Supports newest Mercedes diagnostics W206, W254, W223
• Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5, NTG6, NTG7 flashing/programming
• Works with these diagnostic software: Vediamo, Monaco DTS, Xentry Openshell, XENTRY Flash (XENTRY Diagnosis, XENTRY DAS), SCN coding
• Mercedes Benz Xentry diagnosis VCI DOIP C6 Features:
  Can be used for all model series of For Mercedes For Benz vehicles
  Support DoIP, cover more functions during SCN Coding than SD C4/C5
  Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
  Diagnosis updates no longer necessary – firmware updates required on rare occasions
  Does not need a power supply unit for external power supply
  Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
  Engines (All Gasoline & Diesel Systems)
  Transmissions and Electronic Selector Modules
  Airmatic and Active Body Control Suspension Systems
  Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
  Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
  Drive Authorisation System
  Sam (Signal Acquisition) Modules
  Electronic Ignition System (EIS)
  Pneumatic System Equipment and ATA functions
  Air Conditioning / climate control Systems
  Instrument Cluster
  Tyre Pressure Control
  Parktronic System
  Keyless Go
  D2b Command & Audio Gateway (D2B and MOST networks)
  TV Tuner
  Headlamp Range Adjustment
  Seat Electronics
  Rvc, RST & Vario Roof modules
  Automatic Clutch System ACS
  M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
  Assyst & ASSYST + systems
  
  Supported systems
  Engine
  Transmission
  Climate control system
  SRS (Supplementary restraint system)
  ABS
  ASR
  MPL
  GM
  BENZ ORIGINAL ANTI-THEFT DASX SYSTEM
  System «Keyless-Go» from Mercedes-Benz
  OBD-II SYSTEM
  Advantages
  Light and easy-to-use
  No built-in motherboards, hard-drives, fans, displays and batteries
  No external power needed
  No regular firmware update needed